Marshall DSL1CR 1x8 1-Watt Combo Amp --

Description

ProAudioStar
DJ GEAR
INSTRUMENT GEAR
LIVE SOUND
RECORDING
MICROPHONES
HEADPHONES
ACCESSORIES
SOFTWARE
LIGHTING
BUNDLES
Authorized Dealer - Full Warranty
Marshall DSL1CR 1x8 1-Watt Combo Amp - Used
1-Watt Combo Guitar Amp
- Used -
Description
The DSL 1 Head and DSL 1 Combo feature the same functions. The combo is equipped with an 8” Celestion Eight-15 speaker chosen for its ability to deliver exceptional tone at lower volumes.
The DSL features
two foot switchable channels :
CLASSIC GAIN and ULTRA GAIN.
The CLASSIC GAIN channel delivers sparkling clean sounds through to the more aggressive break-up of a Marshall JCM800 amplifier. The ULTRA GAIN channel provides even more distortion and break-up for players looking for higher gain tone from their amplifier.
Both channels share a passive three-band EQ, with BASS, MIDDLE and TREBLE
controls
. The EQ section also features Tone Shift, which when activated reconfigures the pre-amp mid frequencies making DSL ideal for contemporary metal tones, especially when combined with higher gain settings.
The DSL 1 features professional quality digital REVERB and a series FX LOOP, giving you rich valve tone at an ear-friendly volume.
Important Safety Instructions
Mains Input & Fuse :
The specific mains input voltage rating that your amplifier has been manufactured for is indicated on the rear panel of the amplifier. Your amplifier is provided with a detachable mains (power) lead, which should be connected to the MAINS INPUT socket on the rear panel of the amplifier (Rear Panel Function #12). The correct value and type of mains fuse
is
specified on the rear panel of the amplifier.
NEVER attempt to bypass the fuse or fit one of the incorrect value or type.
Transporting Your
Equipment :
Please ensure that your amplifier is switched off, unplugged from the mains electricity supply and all removable cables have been disconnected from your equipment before attempting to move it.
Important Set Up Information :
When using the DSL1HR, or the DSL1CR with an extension speaker cabinet, you must ensure
that the speaker cabinet is
of
the correct impedance rating. See the LOUDSPEAKER guide in this manual for specific information regarding impedance matching (Rear Panel Function #19).
Ensure that the POWER switch is set to the OFF position. (Front Panel Function #11)
Connect the supplied mains (power) lead into the MAINS INPUT on the rear panel first and then into the mains electricity supply. (Rear Panel Functions #12)
Ensure that the volume controls on the front panel are set to zero. (Front panel Functions #2 & #5)
Plug your guitar into the INPUT jack socket. (Front Panel Function #1)
Switch the amplifier ON using the POWER switch (Front Panel Function #11).
Turn the selected channel volume up to your preferred level and your amplifier is ready to play
Compliance Statement
This device complies with part 15 of the FCC Rules.
Operation
is subject to the following two conditions :
This device may not cause harmful interference
This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Features/Specs
Input
Input jack socket for your guitar cable. Use a good quality screened/shielded guitar cable to help prevent noise interference
Classic Gain Channel
Volume
Controls the volume level of the CLASSIC GAIN channel.
Channel Select
Press to switch between CLASSIC GAIN and ULTRA GAIN channels :
The CLASSIC GAIN channel status light will illuminate green to indicate that CLASSIC GAIN channel is selected.
The ULTRA GAIN channel status light will illuminate red to indicate the ULTRA GAIN channel is selected.
Ultra Gain Channel
Gain
Controls the gain level for the ULTRA GAIN channel. Running a higher gain setting increases the level of distortion in your sound
Volume
Controls the volume level of the ULTRA GAIN channel
Equalisation Section
Tone Shift
Tone Shift reconfigures the preamp EQ, adding a new dimension to tonal shaping
Treble
Controls the higher frequency content of your sound. Turning clockwise will increase the highs making the sound brighter and
more crisp
.
Middle
Controls the middle register of your sound. Turning clockwise increases the level of mid frequencies in your sound. Turning anti-clockwise reduces the middle frequencies, ‘scooping’ the sound – this is accentuated when used in conjunction with Tone Shift (Front Panel Function #6).
Bass
Controls the amount of lower frequency in your sound. Turning clockwise will increase bottom-end making the sound fuller.
Reverb
Controls the overall REVERB level.
Power
Mains power switch.
Mains Input
Connects the amplifier to the mains electricity supply.
Fx Loop Return
Connect the output of an external FX pedal or processor.
Fx Loop Send
Connect the input of an external FX pedal or processor.
F/S
Connect the supplied channel footswitch here (PEDL-90011).
Audio In
Connect an external device here to practice with or jam along to music
Emulated Out
Frequency compensated line level output for headphones or for connection to a mixer. The DSL is equipped with a high quality emulated output using Softube-designed studio cabinet emulation. This ensures that your headphone and output signal from this socket provide the best possible tone for practice or recording.
Low Power
Use LOW POWER to reduce power level from 1 Watt down to 0.1 Watt.
Loudspeaker
Connect a single speaker cabinet here for the DSL1HR head, or
a optional
1 x 16OHM extension speaker cabinet for the
DSLCR
combo.
We are authorized dealers for all these brands. Click a logo to see our listings.
ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge.
If an item is refused by the buyer, ship costs to and from the destination in which the item was shipped to are not refunded. Please note the cost of return shipping is usually double of what the original ship cost.
Shipping is not free to HI, AK, and PR. FREE SHIPPING ONLY TO THE LOWER 48 STATES.
We provide free shipping to the contiguous 48 United States, on most items.
Shipping fees to ALL OTHER LOCATIONS will be calculated individually and added to customer invoices. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. In the event that the customer refuses a shipment, all shipping costs to and from the country or State in which the item was shipped to are not refunded. Please note, in some cases return shipping can cost as much as double the original ship cost.
We operate a 30-day return period. Items must be returned with all original packaging as well as all included items. Items that are not returned in original, resalable condition are subject to a 15% restocking fee. We charge a 15% restocking fee on returned items only if the item is clearly used and or the packaging is tarnished. A 10% re-stock is more likely if the unit comes back in mint condition. The ship cost we paid to ship your item will be deducted as well. In some cases restock fees and ship costs can be applied as a store credit.
We will exchange a defective unit for the same unit within the 30-day period. After that period, you will have to work directly with the manufacturer for warranty service.
Items that can not be returned include: software, units with contents or packaging that is damaged/missing, and items that are considered for personal use (such as earphones, headphones, microphones, instrument mouthpieces, harmonicas or other items that you wouldn't want to purchase if someone else had previously used them). Also, Items which we do not normally stock (i.e. "Special Orders", discontinued products, close-outs, used products, etc.) are non-returnable. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order.
Please contact us for a Return Authorization before returning any items.